![]() "Impact simulations on local damage of reinforced concrete panel influenced by projectile nose shape", Mechanical Engineering Journal, 3, pp. "Ultra-high performance concrete targets against high velocity projectile impact - a-state-of-the-art review", International Journal of Impact Engineering, 160, p. "On the penetration and perforation of concrete targets struck transversely by ogival-nosed projectiles a Numerical study", International Journal of Impact Engineering, 125, pp. ![]() "The embedment of a high velocity rigid ogive nose projectile into a concrete target", International Journal of Impact Engineering, 144, pp.1-15 (2020).ġ4. "Failure analytical model of reinforced concrete slab under impact Loading", Construction and Building Materials, 223, pp. ![]() "Resistance of cement-based materials against high-velocity small caliber deformable projectile impact", International Journal of Impact Engineering, 144, pp. ![]() "Failure mechanism of reinforced concrete subjected to projectile impact loading", Engineering Failure Analysis, 96, pp. "The scaling issue in the penetration of concrete targets by rigid projectiles - Revisited", International Journal of Impact Engineering, 140, pp. "Experimental and numerical investigation on penetration of clay masonry by small high-speed projectile", Defence Technology, 17, pp. "Failure of masonry walls under high velocity impact A numerical study", Engineering Structures, 238, pp. Asad, M., Zahra, T., and Thambiratnam, D. "A study on steelconcrete- steel wall to resist perforation from rigid projectile impact", Shock and Vibration, 2021, Article ID 9986062, pp. "Using the simplified concrete damage plasticity model in studying the penetration depth in concrete", Defect and Diffusion Forum, 415, pp. "Local damage characteristics of reinforced concrete slabs subjected to hard/deformable projectile impact", Advances in Structural Engineering, 25(7), pp. Beppu, M., Shinnosuke Kataoka, S., Mori, K., et al. "Analysis of mechanical haracteristics of walls of masonry structure house under dynamic load", 4th International Conference on Civil, Architecture and Environment Research, pp. Huang, H., Chuanlong, Z., Zhijun, L., et al. "Concrete target quasi-static resistance to a penetrating projectile considering the material constitutive relationships", International Journal of Impact Engineering, 156, pp. Yankelevsky, D.Z., Feldgun, V.R., and Karinski, Y.S. "Experimental study of dynamic material properties of clay brick and mortar at different strain rates", Aust J. Due to the maximum absorption of the impact energy, this type of nose prevented the deformation of the cargo and projectile.ġ. The third type of nose was a combination of flat, conical, and spherical shapes. The projectile was also deformed by this nose. The second type of nose was a combination of flat and conical shapes. This nose was detached from the projectile by impact and did not prevent the projectile deformation. The geometric shape of the noses includes three types: type (a), type (b), and type (c). To pursue this goal, the criterion utilized for the best design in this paper is stress and strain analysis. This non-penetrating projectile can be used to carry a cargo that must reach its destination safely, for example in firefighting applications. The projectile consists of an aluminum nose, a thin-walled steel cylinder body, and an end connector. Numerical, analytical and experimental studies have been carried out to analyze the effect of different nose shapes on the projectile deformation when it hits the brick wall. This paper deals with the design of a deformable nose for the non-penetrating projectile in order to prevent its body deformation.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |